Home / RC Airplane Motors / E-flite Power 60 Brushless Outrunner Motor, 400Kv, 3.5mm Bullet

E-flite Power 60 Brushless Outrunner Motor, 400Kv, 3.5mm Bullet

Quantity
ADD TO CART
BUY IT NOW
  • Detail

    Overview

    The Power 60 is designed to deliver clean and quiet power for 60-size sport and scale airplanes weighing 6 to 10 pounds (2.7–4.5 kg), 46-size 3D airplanes up to 7 pounds (3.2 kg), or models requiring up to 1200 watts of power. It’s an especially good match for Hangar 9 .60-size warbirds like the Corsair 60 (HAN2575), P-47D Thunderbolt 60 (HAN2975), P-40 Warhawk 60 (HAN2850), P-51 Mustang 60 (HAN2375), P-51 Miss America 60 (HAN2775) and .46-size 3D planes such as the Hangar 9 Funtana 40 (HAN1975) or Seagull Harrier 46 (SEA3025).

    Needed To Complete

    • 80A brushless ESC
    • 5S–7S Li-Po or 16- to 24-cell Ni-MH/Ni-Cd
    • 14x8 to 16x10 prop
    Examples of Airplane Setups:
    NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.
    Hangar 9 P-51 Miss America (HAN2775)
    Motor: Power 60
    ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)
    APC 15x10E
    Battery: Thunder Power PRO LITE 6000mAh 6S3P (THP60003S3PPL x2 in series)
    Flying Weight w/Battery: 8.8 lb
    AmpsVoltsWattsInput Watts/PoundRPM
    56.021.311951367375
    Expect very strong performance with a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management.
    Seagull Harrier 3D 46 (SEA3025)
    Motor: Power 60
    ESC: Castle Creations Phoenix 80 (Standard settings with 18V Soft Li-Po cutoff and no brake)
    Prop: APC 16x8E
    Battery: Thunder Power PRO LITE 4200mAh 6S2P (THP42003S2PPL x2 in series)
    Flying Weight w/Battery: 6.4 lb
    AmpsVoltsWattsInput Watts/PoundRPM
    50.521.010601656975
    Expect very strong performance with unlimited vertical and plentiful power for hovering and 3D aerobatics. Average duration is approximately 8 to 15 minutes depending on throttle management.

    Key Features

    • Equivalent to a 60-size glow engine for 6 to 10 lb (2.7 to 4.5 kg) airplanes
    • Ideal for 46-size 3D airplanes up to 7 lb (3.2 kg)
    • Ideal for models requiring up to 1200 watts of power
    • High-torque, direct-drive alternative to inrunner brushless motors
    • Includes mount, prop adapters and mounting hardware
    • External rotor design—6mm shaft can easily be reversed for alternative motor installations
    • Slotted 14-pole outrunner design
    • High-quality construction with ball bearings and hardened steel shaft
    • NOTE: Not recommended to use with E-flite 80-Amp Pro Switch-Mode ESC (EFLA1080B)
    • Quiet, lightweight operation

    Product Specs

    Adjustable Timing
    No
    Bushing Or Bearing
    Bearing
    Connector Type
    3.5mm Bullet
    Idle Current (Io)
    2.70A @ 10V
    Motor Design
    Outrunner
    Motor Type
    Brushless
    Outer Diameter
    2 in (50mm)
    Recommended Prop Range
    14x8 to 16x10
    RPM/Volt (Kv)
    400
    Shaft Diameter
    6mm (.24 in)
    Voltage
    18.5 to 28.8
    Wire Gauge
    14 AWG
  • Customer Reviews
    No comments
BACK

You May Also Like